Interface Classification Conditions

Use the fields in this section to define interface classification conditions.

broadcastAddr

• Interface broadcast address.

• Value—Valid broadcast address format

• Example—broadcastAddr.hostAddress=“ 255.255.255.255”

ifAlias

• Description of an interface.

• Value—Interface description that is configured on the router. For JUNOSe routers, it is the description configured with the interface description command.

• Example—ifAlias=“ 1st pppoe int”

ifDesc

• Alternate name of the interface that is used by SNMP. This name is a system-generated name.

• Value
  • On a JUNOSe router, the format of the description is

    ip<slot>/<port>.<subinterface>

  • On the JUNOS routing platform, ifDesc is the same as interfaceName.

• Example—ifDesc=“ IP3/1.1”

interfaceName

• Name of the interface.

• Value
  • Name of the interface in your router CLI syntax
  • FORWARDING_INTERFACE for routing instance (used by traffic mirroring)

• Example—For JUNOSe routers: interfaceName=“ fastethernet6/0.1”

For JUNOS routing platforms: interfaceName=“ fe-0/1/0.0”

For forwarding interface: interfaceName=“ FORWARDING_INTERFACE”

ipAddress

• Interface IP address.

• Value—Valid IPv4 IP address format

• Example—ipAddress=“ 10.10.30.1”

ipMask

• Interface network mask.

• Value—Valid IPv4 IP network mask format

• Example—ipMask=“ 255.255.255.255”

mtu

• Maximum transfer unit configured on the interface.

• Value—32-integer value

• Example—mtu=“ 1492”

nasPortId

• Port identifier of an interface.

• Value—Includes interface name and additional layer 2 information

• Example—nasPortId=“ fastEthernet 3/1” (There is a space between fastEthernet and slot number 3/1 in the nasPortId.)

pppLoginName

• Login name for PPP subscribers.

• Value—Login name in the format username@domain

• Example—pppLoginName=“ pebbles@virneo.net”

radiusClass

• RADIUS class attribute.

• Value—RADIUS class name

• Example—radiusClass=“ Premium”

serviceBundle

• Content of the vendor-specific RADIUS attribute for the service bundle.

• Value—Name of a service bundle

userIpAddress

• Subscriber IP address (PPP only).

• Value—valid IPv4 address

• Example—userIpAddress=“ 192.168.30.15”

virtualRouterName

• Name of the virtual router or routing instance.

• Value—For JUNOSe routers: name of the virtual router in the format vrname@hostname

  For JUNOS routing platforms: name of the routing instance

• Example—virtualRouterName=“ default@erx5”

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.