[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Test Environment for PCMM Services

Configuring the settings for your test environment is optional. You can choose to enter the settings in the DSA SOAP Client window each time you use the Web client or to configure the default settings. If you choose the latter option, you can avoid repeatedly providing the same information each time you use the client.

Configuring Settings for PCMM Services (SRC CLI)

Use the following command to configure the testing environment for the PCMM Web service interface:

test dsa pcmm-service environment set <client-id client-id> <client-password client-password> <subscriber-address subscriber-address> <subscriber-uri subscriber-uri>

To configure the settings for the test environment:

  1. Issue the test dsa pcmm-service environment set command.
  2. (Optional) To specify the username that Dynamic Service Activator uses to authenticate this client, use the client-id option.
  3. (Optional) To specify the password that Dynamic Service Activator uses to authenticate this client, use the client-password option.
  4. (Optional) To specify the IP address of the subscriber, use the subscriber-address option.
  5. (Optional) To specify the subscriber’s Uniform Resource Identifier (URI), use the subscriber-uri option.

Verifying Settings for PCMM Services (SRC CLI)

Use the following command to verify the settings for the PCMM Web service interface:

test dsa pcmm-service environment show

Use the following commands to verify specific settings:

test dsa pcmm-service environment show client-id
test dsa pcmm-service environment show client-password
test dsa pcmm-service environment show subscriber-address
test dsa pcmm-service environment show subscriber-uri

Deleting Settings for PCMM Services (SRC CLI)

Use the following commands to delete the settings for the PCMM Web service interface:

test dsa pcmm-service environment clear

Use the following commands to delete specific settings:

test dsa pcmm-service environment clear client-id
test dsa pcmm-service environment clear client-password
test dsa pcmm-service environment clear subscriber-address
test dsa pcmm-service environment clear subscriber-uri

Related Topics

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.