[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Initial Properties for IMS (SRC CLI)

Use the following configuration statements to configure initial properties for IMS:

slot number ims initial {
static-dn static-dn;
dynamic-dn dynamic-dn;
}

To configure initial local properties:

  1. From configuration mode, access the statement that configures the initial properties.
    user@host# edit slot 0 ims initial
  2. Specify the properties for IMS.
    [edit slot 0 ims initial]
    user@host# set ?

    For more information about configuring local properties for SRC components, see Configuring Basic Local Properties.

  3. (Optional) Verify your configuration.
    [edit slot 0 ims initial] 
user@host# show 
    
            
    
         
    4. 
      

      
Related Topics

      
      

      [Contents]
      [Prev]
      [Next]
      
      [Index]
      
      [Report an Error]
      


         

            

               
               Copyright © 2009, Juniper Networks, Inc.
                  All rights reserved.
                  	Trademark Notice.