[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Remote Diameter Peer (SRC CLI)

Use the following configuration statements to configure the remote Diameter peer:


            
               slot number ims aracf-rq peer name { 
               
               address address; 
               
               port port; 
               
               origin-host origin-host; 
               
               watchdog-timeout watchdog-timeout; 
               
               incoming-queue-limit incoming-queue-limit; 
               
               }

To configure the remote Diameter peer:

From configuration mode, access the statement that configures the Diameter peer. In this sample procedure, the remote SPDF peer called primary-spdf is configured.
user@host# edit slot 0 ims aracf-rq peer primary-spdf
(Optional) Specify the IP address of the remote peer.
[edit slot 0 ims aracf-rq peer primary-spdf] user@host# set address address
(Optional) Specify the port of the remote peer.
[edit slot 0 ims aracf-rq peer primary-spdf] user@host# set port port
(Optional) Specify the Diameter identifier for the remote endpoint that is the originator of the Diameter message.
[edit slot 0 ims aracf-rq peer primary-spdf] user@host# set origin-host origin-host
(Optional) Specify the watchdog timeout of the connection to the remote peer.
[edit slot 0 ims aracf-rq peer primary-spdf] user@host# set watchdog-timeout watchdog-timeout
(Optional) Specify the size of the incoming message queue before the system rejects messages.
[edit slot 0 ims aracf-rq peer primary-spdf] user@host# set incoming-queue-limit incoming-queue-limit

(Optional) Verify your configuration.

[edit slot 0 ims aracf-rq peer primary-spdf] 
user@host# show 
address 127.0.0.1;
origin-host testclient;

Configuring the Remote Diameter Peer (SRC CLI)

Related Topics