Configuring Initial Properties for the SDX SNMP Agent

Use the following configuration statements to configure initial properties for the SDX SNMP agent:

snmp agent initial {
base-dn base-dn;
host-id host-id;
}

To configure properties for the SDX SNMP agent:

  1. From configuration mode, access the configuration statement that configures the SDX SNMP agent.
    [edit]
    user@host# edit snmp agent initial
  2. Specify the DN of the directory used for the SNMP agent configuration data.
    [edit snmp agent initial]
    user@host# set base-dn base-dn
  3. Identifies the system management configuration in the directory server that provides the remaining configuration for the SNMP agent.
    [edit snmp agent initial]
    user@host# set host-id host-id

    If the entry does not exist, the entry and the subentries for the components and traps is automatically created in the system management configuration.

  4. (Optional) Verify your configuration. 
    [edit snmp agent initial] 
user@host# show 
base-dn o=UMC;
host-id POP-ID;
directory-connection { 
  url ldap://127.0.0.1:389/;
  principal cn=sysman,ou=components,o=operators,<base>;
  credentials ********;
}
directory-eventing { 
  eventing;
}
    

    5.