Specifying Policy Server Identifiers in Messages

Use the following configuration statements to configure policy server identifiers for the JPS:



slot number jps { 
policy-server-id policy-server-id; 
use-psid-in-gate-commands; 
}

To configure policy server identifiers for the JPS:

From configuration mode, access the configuration statement that configures the policy server identifiers. user@host# edit slot 0 jps
(Optional) Specify the policy server identifier so that the JPS can be identified in messages sent to CMTS devices. [edit slot 0 jps] user@host# set policy-server-id policy-server-id
(Optional) Configure the JPS so that the policy server identifier is specified in messages sent to the RKS. [edit slot 0 jps] user@host# set use-psid-in-gate-commands
When the JPS is communicating only with PCMM I03 CMTS devices, the value must be true. When the JPS is communicating with any pre-PCMM I03 CMTS devices, the value must be false.
(Optional) Verify your configuration.
```
[edit slot 0 jps]
user@host# show
```