Enabling the Subscriber and Subscription Configuration on the SRC CLI

Before you can configure subscribers and subscriptions with the SRC CLI, you must enable the policy, service, and subscriber editor on the SRC CLI. To do so:

• In operational mode, enter the following command:
  user@host> enable component editor

If you are using multiple C-series Controllers, we recommend that you enable the policy, service, and subscriber editor on only one C-series Controller on your network. If you enable the editor on multiple platforms, there is a risk that configuration changes will conflict. In this case, the second edit that is committed to the platform is lost.

Related Topics

• Enabling the Subscriber and Subscription Configuration on the C-Web Interface
• Configuring Subscriptions (SRC CLI)
• Overview of Configuring Subscribers and Subscriptions
• Enterprise Subscriber and Subscription Hierarchy

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.