Configuring Services

To configure services to mirror subscriber traffic:

1. Configure a policy to mirror traffic for a subscriber whose IP addresses are specified by the fragSubrIps parameter.

   For a mirroring policy, you specify policy rules for traffic sent to and received from the subscriber (the value of the fragSubrIps parameter) that have the traffic-mirror action.

   For a sample policy that implements mirroring, see policyGroupName=mirror, ou=tm, o=Policies, o=umc in the sample data.

2. Create a service for the scope that defines mirroring services, which is a router fragment service; set the type to normal, and specify the policy group configured in Step 1. This service is activated once for each router in a specified POP.

   For a sample service, see servicename=MirrorFragment, l=TM, o=Scopes, o=umc in the sample data.

3. Create an aggregate service for the scope that defines mirroring services; set the type to aggregate; and define the fragment service in the Aggregate tab of the SSP Service pane by using the field descriptions in Aggregate Service Fields for Mirroring Traffic to enter the information in the fields of the Service Fragment dialog box.

   For a sample aggregate service, see serviceName=MirrorAggregate, o=TM, o=Scopes, o=umc in the sample data.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.