[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuring Directory Properties for the Surveillance Director
You configure properties specific to the Surveillance
Director to access network data in the directory through the directory
eventing system (DES). For more information about the DES, see Overview of the Directory Eventing System.
To use SDX Configuration Editor to configure the
directory properties for the Surveillance Director:
- In the navigation pane, select the des.xml file under SurveillanceDirector.
- Select the LDAP tab, and expand
the Network and DES Client
Configurations sections.
The following pane shows the properties available
with the Editing Level for SDX Configuration Editor set to Normal.
- In the Network section, edit or accept the default values
for the field.
See Network Field .
- In the DES Client Configurations section, edit or accept
the default values for the fields.
To complete the entries under DES Client Configuration,
see Overview of the Directory Eventing System.
- Select File > Save.
- Right-click the configuration file, and select SDX System Configuration > Export to
LDAP Directory.
- After you complete the configuration changes, stop and
then restart the Surveillance Director for the configuration changes
to take effect. Use the following commands to stop and then start
the Surveillance Director:
-
/opt/UMC/idp/etc/sd stop
-
/opt/UMC/idp/etc/sd start
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
