Configuring the CoA Script Service with the SRC CLI

To configure the script service, you provide parameter substitutions with the values that are in the service definitions.

To configure parameters:

1. From configuration mode, enter the service parameter configuration. In this sample procedure, the service called CoAservice is configured in the global service scope.

   user@host# edit services global service CoAservice parameter

2. (Optional) Configure actual values for other parameters.

   [edit services global service CoAservice parameter]

   user@host# set substitution [ substitution... ]

   The script file / SDK/scriptServices/coa/ldif/BOD1M.ldif in the SDK+AppSupport+Demos+Samples.tar.gz file provides parameters specified by the sample CoA script service. You can use the sample script service as a starting point. See Parameters for Sample CoA Script Service.

Related Topics

• Overview of CoA Script Service
• Configuring Subscriptions to the CoA Script Service
• Creating the CoA Script Service with the SRC CLI
• Configuring CoA Script Services
• Example: Using the Sample CoA Script Service

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.