[Contents] [Prev] [Next] [Index] [Report an Error]

Defining a Discontinuity Check to Validate Delta Values (SRC CLI)

You can configure a monitor to use a discontinuity check to prevent sending false alarms when the value of the monitored object is reset between two samples.

Use a discontinuity check when the sampling type for a monitor is delta-value and the test type is boolean or threshold. You define a variable, called a discontinuity marker (a MIB object used to validate the delta, or difference, between values). Typically, the marker object is of the type TimeTicks, DateAndTime, or Timestamp.

To define a discontinuity check:

Configure an SNMP alarm with the sample type set to delta-value.
See Configuring an SNMP Alarm on a C-series Controller (SRC CLI).
From configuration mode, access the configuration statements that configures a discontinuity check. For example, for an alarm named ifErrorsDelta:[edit] user@host# edit snmp monitor alarm ifErrorsDelta delta-discontinuity-check
Specify the name or object identifier (OID) of the discontinuity marker. For example:[edit snmp monitor alarm sequence-check ifErrorsDelta delta-discontinuity-check] user@host# set variable ifTable.ifEntry.ifLastChange

Defining a Discontinuity Check to Validate Delta Values (SRC CLI)

Related Topics