Configuring the RADIUS Local IP Address and NAS ID (SRC CLI)

Use the following configuration statements to set the local RADIUS address and network access server (NAS ID):



slot  number  sae radius
{
local-address  local-address ; 
local-nas-id  local-nas-id ; 
}

To set the local RADIUS address and NAS ID:

From configuration mode, access the SAE RADIUS configuration. This configuration is under the slot 0 hierarchy. [edit] user@host# edit slot 0 sae radius
Configure the local IP address that the SAE uses to communicate with RADIUS servers. [edit slot 0 sae radius] user@host# set local-address local-address
Configure the NAS ID that identifies the SAE when it sends RADIUS authentication and accounting records. Typically, the NAS ID is the name of the SAE host.[edit slot 0 sae radius] user@host# set local-nas-id local-nas-id

(Optional) Verify your configuration.

[edit slot 0 sae radius] 
user@host# show 
local-address 10.10.4.20;
local-nas-id SAE.host1;