[Contents] [Prev] [Next] [Index] [Report an Error]

Assigning Security Names to Groups

For SNMPv1 or SNMPv2c packets, you must assign security names to groups and you must associate a security name with an SNMP community at the [edit snmp v3 snmp-community community-index ] hierarchy level.

Use the following configuration statements to assign security names to groups:



snmp v3 vacm security-to-group security-model (v1|v2c|usm)
... 
snmp v3 vacm security-to-group security-model (v1|v2c|usm)
security-name security-name { 
group-name group-name; 
}

To map security names to groups for the VACM:

From configuration mode, access the configuration statement that configures the security model for a group. user@host# edit snmp v3 vacm security-to-group security-model (v1|v2c|usm)
To specify the SNMPv1 security model:
user@host# edit snmp v3 vacm security-to-group security-model v1
To specify the SNMPv2c security model:
user@host# edit snmp v3 vacm security-to-group security-model v2c
To specify the SNMPv3 user-based security model (USM):
user@host# edit snmp v3 vacm security-to-group security-model usm
Specify the security name. user@host# edit snmp v3 vacm security-to-group security-model (v1|v2c|usm) security-name security-name
If the security model is USM, the security name is the username configured at the [edit snmp v3 usm local-engine user] hierarchy level.
Specify the group to which the security name is assigned. [edit snmp v3 vacm security-to-group security-model (v1|v2c|usm) security-name security-name] user@host# set group-name group-name

Assigning Security Names to Groups

Related Topics