Using JUNOSe Routers in the SRC Network (C-Web Interface)

This chapter describes how to use the C-Web interface to set up the SRC software and how to set up a JUNOSe router so that the router can be used in the SRC network. It also shows how to monitor the interactions between the SAE and the JUNOSe router and how to troubleshoot SRC problems on the router.

Topics in this chapter include:

• COPS Connection Between JUNOSe Routers and the SAE
• Adding JUNOSe Routers and Virtual Routers (C-Web Interface)
• Configuring the SAE to Manage JUNOSe Routers (C-Web Interface)
• Using SNMP to Retrieve Information from JUNOSe Routers
• Specifying JUNOSe Router Initialization Scripts on the SAE (C-Web Interface)
• Developing Router Initialization Scripts for JUNOSe Routers, JUNOS Routing Platforms, and Network Devices
• Accessing the Router CLI
• Starting the SRC Client on a JUNOSe Router
• Stopping the SRC Client on a JUNOSe Router
• Monitoring Interactions Between the SAE and the JUNOSe Router
• Troubleshooting Problems with Managing JUNOSe Routers
• Viewing the State of JUNOSe Device Drivers (C-Web Interface)
• Viewing Statistics for Specific JUNOSe Device Drivers (C-Web Interface)
• Viewing Statistics for All JUNOSe Device Drivers (C-Web Interface)

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.