Configuring Traffic-Mirror Actions (C-Web Interface)

Use this action to mirror traffic from a destination to a source or from a source to a destination. You can configure traffic-mirror actions for JUNOS filter input policy rules.

Before you use traffic-mirror actions, you must configure forwarding options on JUNOS routing platforms for port mirroring and next-hop group. For information about how these features work on the router, see the JUNOS Policy Framework Configuration Guide.

The rule containing a traffic-mirror action must comply with these conditions:

• It must be combined with forward actions in the same rule. One of the forward actions must accept the traffic if the source and/or destination IP addresses do not match the conditions.
• It contains either no classify-traffic condition or only one classify-traffic condition.
• It can be marked for accounting.

To configure a traffic-mirror action:

1. In the side pane, select a JUNOS filter policy rule.
2. From the Create new list, select Traffic Mirror. Type a name for the action, and click OK.
3. Enter information as described in the Help text in the main pane, and click Apply.

Related Topics

• Configuring Classify-Traffic Conditions (C-Web Interface)
• Configuring Traffic-Mirror Actions (SRC CLI)
• Configuring Forward Actions (C-Web Interface)

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.