Configuring NTP Authentication (C-Web Interface)

You can specify authentication keys for the various modes you configure for NTP.

To configure the authentication key for a mode:

• In the main pane, specify a key value for a mode.
  • Client mode—See Specifying a Basic NTP Configuration on a C-series Controller (C-Web Interface)
  • Server mode—See Configuring NTP Client Mode for a C-series Controller (C-Web Interface)
  • Broadcast mode—See Configuring NTP Broadcast Mode on a C-series Controller (C-Web Interface)
  • Symmetric active (peer) mode—See Configuring an NTP Peer for a C-series Controller (C-Web Interface)

Related Topics

• NTP Support on C-series Controllers
• Configuring NTP on a C-series Controller
•  Specifying an Authentication Key for NTP on C-series Controllers (C-Web Interface)

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.