Enabling the Subscriber and Subscription Configuration on the C-Web Interface

Before you can configure subscribers and subscriptions with the C-Web interface, you must enable the policy, service, and subscriber editor on the C-Web interface. To do so :

1. Click Manage>Enable.

   The Enable pane appears.

2. From the Component list, select Editor, and click OK.

If you are using multiple C-series Controllers, we recommend that you enable the policy, service, and subscriber editor on only one C-series Controller on your network.

Caution: If you enable the editor on multiple platforms, there is a risk that configuration changes will conflict. In this case, the second edit that is committed to the platform is lost.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.