Configuring Local Properties for SRC-ACP (C-Web Interface)

To configure the local properties for SRC-ACP:

1. Configuring Basic Local Properties for SRC-ACP
2. Configuring Initial Properties for SRC-ACP
3. Configuring Directory Connection Properties for SRC-ACP
4. Configuring Initial Directory Eventing Properties for SRC-ACP

Configuring Basic Local Properties for SRC-ACP

To configure basic local properties:

1. Click Configure>Slot>Slot:0>ACP.
2. Enter information as described in the Help text in the main pane, and click Apply.

Configuring Initial Properties for SRC-ACP

To configure initial properties for SRC-ACP:

1. Click Configure>Slot>Slot:0>ACP>Initial.
2. If desired, specify the properties for ACP as described in the Help text in the main pane, and click Apply.

Configuring Directory Connection Properties for SRC-ACP

To configure directory connection properties:

1. Click Configure>Slot>Slot:0>ACP>Initial>Directory Connection.

   The Directory Connection pane appears.

2. Enter information as described in the Help text in the main pane, and click Apply.

Configuring Initial Directory Eventing Properties for SRC-ACP

To configure initial directory eventing properties:

1. Click Configure>Slot>Slot:0>ACP>Initial> Directory Eventing.

   The Directory Eventing pane appears.

2. Enter information as described in the Help text in the main pane, and click Apply.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.