Viewing IPMI Chassis Information

You can view IPMI chassis information for the controller you are currently logged in to and for a remote controller. You must be logged on as a root user.

To display the chassis information on the local controller using IPMI:

1. Log in as root user.

   SRC-PE Release 3.1 [R.3.1.0-12]

   login: root

2. Enter the password.

   Password: password

   --- SRC CLI 3.1 build CLI.R.3.1.0.012

   (c) 2005-2008 Juniper Networks Inc.

   root@host>

   You are now logged in as root user.

3. Enter the show ipmi chassis command.

   For example:

   
   root@host>show ipmi chassis

   System Power         : on
   Power Overload       : false
   Power Interlock      : inactive
   Main Power Fault     : false
   Power Control Fault  : false
   Power Restore Policy : always-off
   Last Power Event     : 
   Chassis Intrusion    : inactive
   Front-Panel Lockout  : inactive
   Drive Fault          : false
   Cooling/Fan Fault    : false

   System Power         : on
   Power Overload       : false
   Power Interlock      : inactive
   Main Power Fault     : false
   Power Control Fault  : false
   Power Restore Policy : always-off
   Last Power Event     : 
   Chassis Intrusion    : inactive
   Front-Panel Lockout  : inactive
   Drive Fault          : false
   Cooling/Fan Fault    : false

To display the IPMI chassis information on a remote controller:

1. Log in as root user.
2. Enter the show ipmi host chassis command.

   user@host>show ipmi host host user user chassis

   • host—IP address of remote host IPMI interface
   • user—IPMI username configured in the remote host

   For example:

   root@host>show ipmi host 10.10.10.30 user johndoe chassis

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.