Configuring the Subscriber Type (SRC CLI)

Use the following configuration statements to configure the subscriber type:

shared ims aracf-rq configuration subscriber-types (ip | login-name) {
nic-proxy nic-proxy;
subscriber-id-type (address | login-name | primary-user-name);
}

To configure the subscriber type:

  1. From configuration mode, access the configuration statement that configures the subscriber type.
    user@host# edit shared ims aracf-rq configuration subscriber-types (ip | login-name)

    where:

    • ip—Subscriber type of IP address
    • login-name—Subscriber type of login ID

    For example, the subscriber type called ip is configured in this sample procedure.

    user@host# edit shared ims aracf-rq configuration subscriber-types ip
  2. Specify the namespace that defines the properties for the NIC proxy operations for the specified subscriber ID type. Each subscriber type must use a different NIC proxy. In this sample procedure, the namespace for the NIC proxy called ip is configured.
    [edit shared ims aracf-rq configuration subscriber-types ip]
    user@host# set nic-proxy ip
  3. (Optional) Specify the type of information used to identify the subscriber.
    [edit shared ims aracf-rq configuration subscriber-types ip]
    user@host# set subscriber-id-type (address | login-name | primary-user-name)

    where:

    • address—Subscriber’s IP address
    • login-name—Subscriber’s login name
    • primary-user-name—Primary username

    In this sample procedure, the subscriber ID type is specified as the subscriber IP address.

    [edit shared ims aracf-rq configuration subscriber-types ip]
    user@host# set subscriber-id-type address
  4. (Optional) Verify your configuration. 
    [edit shared ims aracf-rq configuration subscriber-types ip] 
user@host# show

    

    5.