Configuring the Local Diameter Peer (SRC CLI)

Use the following configuration statements to configure the local Diameter peer:

slot number ims aracf-rq {
protocol protocol;
port port;
address address;
origin-host origin-host;
origin-realm origin-realm;
}

To configure the local Diameter peer:

  1. From configuration mode, access the configuration statement that configures the Diameter peer.
    user@host# edit slot 0 ims aracf-rq
  2. (Optional) Specify the protocol used for the transport layer.
    [edit slot 0 ims aracf-rq]
    user@host# set protocol protocol
  3. (Optional) Specify the port used for incoming connections.
    [edit slot 0 ims aracf-rq]
    user@host# set port port
  4. (Optional) Specify the IP address of the local peer.
    [edit slot 0 ims aracf-rq]
    user@host# set address address
  5. (Optional) Specify the Diameter identifier for the local endpoint that is the originator of the Diameter message.
    [edit slot 0 ims aracf-rq]
    user@host# set origin-host origin-host
  6. (Optional) Specify the Diameter identifier for the realm of the local endpoint that is the originator of the Diameter message.
    [edit slot 0 ims aracf-rq]
    user@host# set origin-realm origin-realm
  7. (Optional) Verify your configuration. 
    [edit slot 0 ims aracf-rq] 
user@host# show 
protocol tcp;
port 3868;
address 127.0.0.1;
origin-host testserver;
origin-realm testrealm;
peer 1 {
  address 127.0.0.1;
  origin-host testclient;
}
    

    8.