Adding Virtual Routers Individually

Use the following configuration statements to add a virtual router:

shared network device name virtual-router name {
sae-connection [ sae-connection ...];
snmp-read-community snmp-read-community ;
snmp-write-community snmp-write-community ;
scope [ scope ...];
local-address-pools local-address-pools ;
static-address-pools static-address-pools ;
tracking-plug-in [ tracking-plug-in ...];
}

To add a virtual router:

  1. From configuration mode, access the configuration statements for virtual routers. You must specify the name of a device with lowercase characters. This procedure uses junose_Boston as the name of the router and vr1 as the name of the virtual router.
    user@host# edit shared network device junose_boston virtual-router vr1
  2. Specify the addresses of SAEs that can manage this router. This step is required for the SAE to work with the router.
    [edit shared network device junose_boston virtual-router vr1]
    user@host# set sae-connection [ sae-connection ...]

    To specify the active SAE and the redundant SAE, enter an exclamation point (!) after the hostname or IP address of the connected SAE. For example:

    [edit shared network device junose_boston virtual-router vr1]
    user@host# set sae-connection [sae1! sae2!]
  3. (Optional) Specify an SNMP community name for SNMP read-only operations for this VR.
    [edit shared network device junose_boston virtual-router vr1]
    user@host# set snmp-read-community snmp-read-community
  4. (Optional) Specify an SNMP community name for SNMP write operations for this virtual router.
    [edit shared network device junose_boston virtual-router vr1]
    user@host# set snmp-write-community snmp-write-community
  5. (Optional) Specify service scopes assigned to this virtual router. The scopes are available for subscribers connected to this virtual router for selecting customized versions of services.
    [edit shared network device junose_boston virtual-router vr1]
    user@host# set scope [ scope ...]
  6. (Optional) Specify the list of IP address pools that a JUNOSe virtual router currently manages and stores.
    [edit shared network device junose_boston virtual-router vr1]
    user@host# set local-address-pools local-address-pools
  7. (Optional) Specify the list of IP address pools that a JUNOSe VR manages but does not store.
    [edit shared network device junose_boston virtual-router vr1]
    user@host# set static-address-pools static-address-pools
  8. (Optional) Specify the plug-ins that track interfaces that the SAE manages on this virtual router.
    [edit shared network device junose_boston virtual-router vr1]
    user@host# tracking-plug-in [ tracking-plug-in ...]
  9. (Optional) Verify your configuration. 
    [edit shared network device junose_boston virtual-router vr1] 
user@host# show 
sae-connection 192.168.10.25;
  snmp-read-community ********;
  snmp-write-community ********;
  scope POP-Boston;
local-address-pools "(10.25.8.0 10.25.20.255])";
static-address-pools "({10.30.30.0/24,10.30.30.0,10.30.30.255})";
tracking-plug-in flexRadius;
    

    10.