Specifying Router Initialization Scripts on the SAE with the CLI

Use the following configuration statements to specify router initialization scripts for JUNOSe routers:

shared sae configuration driver scripts {
extension-path extension-path ;
general general ;
junose-pr junose-pr ;
junose-xdr junose-xdr ;
}

To configure router initialization scripts for JUNOSe routers:

  1. From configuration mode, access the configuration statements that configure router initialization scripts. In this sample procedure, the scripts are configured in the west-region group.
    user@host# edit shared sae group west-region configuration driver scripts
  2. Specify the script for JUNOSe routers when the JUNOSe driver uses COPS-PR mode when connecting to the SAE.
    [edit shared sae group west-region configuration driver scripts]
    user@host# set junose-pr junose-pr
  3. Specify the script for JUNOSe routers when the JUNOSe driver uses COPS-XDR mode when connecting to the SAE.
    [edit shared sae group west-region configuration driver scripts]
    user@host# set junose-xdr junose-xdr

    In COPS-XDR mode, the router does not send the network access server (NAS) IP address to the SAE. If your configuration requires this value, add the following line to a JUNOSe script:

    import ERXnasip
  4. Configure a router initialization script that can be used for all types of routers that the SRC software supports.
    [edit shared sae group west-region configuration driver scripts]
    user@host# set general general
  5. Configure a path to router initialization scripts that are not in the default location, /opt/UMC/sae/lib.
    [edit shared sae group west-region configuration driver scripts]
    user@host# set extension-path extension-path
  6. (Optional) Verify your router initialization script configuration. 
    [edit shared sae group west-region configuration driver scripts]
user@host# show 
junose-xdr poolPublisher;