[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Remote Diameter Peer (SRC CLI)

Use the following configuration statements to configure the remote Diameter peer:



slot number ims aracf-rq peer name { 
address address; 
port port; 
origin-host origin-host; 
watchdog-timeout watchdog-timeout; 
incoming-queue-limit incoming-queue-limit; 
}

To configure the remote Diameter peer:

From configuration mode, access the configuration statement that configures the Diameter peer. In this sample procedure, the remote SPDF peer called primary-spdf is configured. user@host# edit slot 0 ims aracf-rq peer primary-spdf
(Optional) Specify the IP address of the remote peer. [edit slot 0 ims aracf-rq peer primary-spdf] user@host# set address address
(Optional) Specify the port of the remote peer. [edit slot 0 ims aracf-rq peer primary-spdf] user@host# set port port
(Optional) Specify the Diameter identifier for the remote endpoint that is the originator of the Diameter message. [edit slot 0 ims aracf-rq peer primary-spdf] user@host# set origin-host origin-host
(Optional) Specify the watchdog timeout of the connection to the remote peer. [edit slot 0 ims aracf-rq peer primary-spdf] user@host# set watchdog-timeout watchdog-timeout
(Optional) Specify the size of the incoming message queue before the system rejects messages. [edit slot 0 ims aracf-rq peer primary-spdf] user@host# set incoming-queue-limit incoming-queue-limit

(Optional) Verify your configuration.

[edit slot 0 ims aracf-rq peer primary-spdf] 
user@host# show 
address 127.0.0.1;
origin-host testclient;

Configuring the Remote Diameter Peer (SRC CLI)

Related Topics