[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Reject Actions (SRC CLI)

You can configure reject actions for JUNOS filter policy rules. The reject action causes the router to discard a packet and send an ICMP destination unreachable message.

The type of action that you can create depends on the type of policy rule. See Policy Information Model.

Use the following configuration statements to configure reject actions:



policies group  name  list  name  rule  name  reject  name  {
message-type  message-type ; 
description  description ; 
}

To configure a reject action:

From configuration mode, enter the reject action configuration. For example, in this procedure, rejectAction is the name of the reject action. user@host# edit policies group junos list filter rule rejectRule reject rejectAction
(Optional) Configure the type of ICMP destination unreachable message sent to the client. [edit policies group junos list filter rule rejectRule reject rejectAction] user@host# set message-type message-type
(Optional) Enter a description for the reject action. [edit policies group junos list filter rule rejectRule reject rejectAction] user@host# set description description

(Optional) Verify the reject action configuration.

[edit policies group junos list filter rule rejectRule reject rejectAction]
user@host# show 
message-type network-prohibited;
description "Reject action in JUNOS filter policy";

Configuring Reject Actions (SRC CLI)

Related Topics