[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the SAE to Manage JUNOSe Routers with the CLI

To set up the SAE to manage JUNOSe routers, configure a router driver that specifies a COPS server that can accept COPS connections from the COPS client in JUNOSe routers.

Use the following configuration statements to configure the SAE to manage JUNOSe routers:



shared sae configuration driver junose {
cops-server-port  cops-server-port ; 
backlog  backlog ; 
keepalive-interval  keepalive-interval ; 
message-timeout  message-timeout ; 
cops-message-maximum-length  cops-message-maximum-length ; 
cops-message-read-buffer-size  cops-message-read-buffer-size ; 
cops-message-write-buffer-size  cops-message-write-buffer-size ; 
pending-address-timeout  pending-address-timeout ; 
cops-handler-threads  cops-handler-threads ; 
cached-driver-expiration  cached-driver-expiration ; 
drop-unmanaged-interfaces-xdr-driver; 
track-unmanaged-interfaces-xdr-driver; 
}

To configure the SAE to manage JUNOSe routers:

From configuration mode, access the configuration statement that configures the JUNOS router driver. In this sample procedure, the JUNOSe driver is configured in the west-region group. user@host# edit shared sae group west-region configuration driver junose
Configure the port number of the SAE COPS server. The port number must match the configuration of the SRC client in the JUNOSe router.[edit shared sae group west-region configuration driver junose] user@host# set cops-server-port cops-server-port
Configure the number of outstanding connection attempts before connections are dropped. [edit shared sae group west-region configuration driver junose] user@host# set backlog backlog
Configure the interval between keepalive messages sent from the COPS client (the JUNOSe router). [edit shared sae group west-region configuration driver junose] user@host# set keepalive-interval keepalive-interval
Configure the timeout interval in which the COPS server waits for a response to COPS requests.[edit shared sae group west-region configuration driver junose] user@host# set message-timeout message-timeout
Configure the maximum length of a COPS message.[edit shared sae group west-region configuration driver junose] user@host# set cops-message-maximum-length cops-message-maximum-length
Configure the buffer size for receiving COPS messages from the JUNOSe client. We recommend that you use the default setting unless you are instructed to change it by Juniper Networks.[edit shared sae group west-region configuration driver junose] user@host# set cops-message-read-buffer-size cops-message-read-buffer-size
Configure the buffer size for sending COPS messages to the JUNOSe client. We recommend that you use the default setting unless you are instructed to change it by Juniper Networks. [edit shared sae group west-region configuration driver junose] user@host# set cops-message-write-buffer-size cops-message-read-buffer-size
Configure the maximum time that a DHCP address request remains pending. [edit shared sae group west-region configuration driver junose] user@host# set pending-address-timeout pending-address-timeout
Configure the size of the thread pool for handling unsolicited messages. These threads are shared among all JUNOSe router drivers.[edit shared sae group west-region configuration driver junose] user@host# set cops-handler-threads cops-handler-threads
Configure the minimum amount of time to keep the state of a router driver after its COPS connection has been closed.[edit shared sae group west-region configuration driver junose] user@host# set cached-driver-expiration cached-driver-expiration
(Optional) If you are using COPS-XDR, specify whether or not the JUNOSe router driver keeps a record of unmanaged interfaces. [edit shared sae group west-region configuration driver junose] user@host# set drop-unmanaged-interfaces-xdr-driver
(Optional) Enable or disable sending of interface-tracking events for unmanaged interfaces for the XDR router driver.[edit shared sae group west-region configuration driver junose] user@host# set track-unmanaged-interfaces-xdr-driver

(Optional) Verify your configuration.

[edit shared sae group west-region configuration driver junose]
user@host# show 
cops-server-port 3288;
backlog 50;
keepalive-interval 45;
message-timeout 120000;
cops-message-maximum-length 200000;
cops-message-read-buffer-size 30000;
cops-message-write-buffer-size 30000;
pending-address-timeout 5000;
cops-handler-threads 20;
cached-driver-expiration 600;
drop-unmanaged-interfaces-xdr-driver;
track-unmanaged-interfaces-xdr-driver;

Configuring the SAE to Manage JUNOSe Routers with the CLI

Related Topics