Specifying Router Initialization Scripts on the SAE with the CLI

Use the following configuration statements to specify router initialization scripts for JUNOSe routers:



shared sae configuration driver scripts {
extension-path  extension-path ; 
general  general ; 
junose-pr  junose-pr ; 
junose-xdr  junose-xdr ; 
}

To configure router initialization scripts for JUNOSe routers:

From configuration mode, access the configuration statements that configure router initialization scripts. In this sample procedure, the scripts are configured in the west-region group. user@host# edit shared sae group west-region configuration driver scripts
Specify the script for JUNOSe routers when the JUNOSe driver uses COPS-PR mode when connecting to the SAE.[edit shared sae group west-region configuration driver scripts] user@host# set junose-pr junose-pr
Specify the script for JUNOSe routers when the JUNOSe driver uses COPS-XDR mode when connecting to the SAE.[edit shared sae group west-region configuration driver scripts] user@host# set junose-xdr junose-xdr
In COPS-XDR mode, the router does not send the network access server (NAS) IP address to the SAE. If your configuration requires this value, add the following line to a JUNOSe script:
import ERXnasip
Configure a router initialization script that can be used for all types of routers that the SRC software supports.[edit shared sae group west-region configuration driver scripts] user@host# set general general
Configure a path to router initialization scripts that are not in the default location, /opt/UMC/sae/lib.[edit shared sae group west-region configuration driver scripts] user@host# set extension-path extension-path

(Optional) Verify your router initialization script configuration.

[edit shared sae group west-region configuration driver scripts]
user@host# show 
junose-xdr poolPublisher;