[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Access to Service Data

Use the following configuration statements to configure access to service data:



shared sae configuration ldap service-data {
server-address  server-address ; 
dn dn; 
authentication-dn  authentication-dn ; 
password  password ; 
directory-eventing; 
polling-interval  polling-interval ; 
(ldaps); 
}

To configure SAE access to service data:

From configuration mode, access the configuration statement that configures SAE access to service data in the directory. In this sample procedure, the service data is configured in the se-region group.user@host# edit shared sae group se-region configuration ldap service-data
(Optional) Specify the directory server that stores service data. [edit shared sae group se-region configuration ldap service-data] user@host# set server-address server-address
Specify the subtree in the directory where service data is cached.[edit shared sae group se-region configuration ldap service-data] user@host# set dn dn
(Optional) Specify the DN that the SAE uses to authenticate access to the directory server.[edit shared sae group se-region configuration ldap service-data] user@host# set authentication-dn authentication-dn
(Optional) Specify the password used to authenticate access to the directory server.[edit shared sae group se-region configuration ldap service-data] user@host# set password password
(Optional) Enable or disable automatic discovery of changes to service data.[edit shared sae group se-region configuration ldap service-data] user@host# set directory-eventing
Set the frequency for checking the directory for updates. [edit shared sae group se-region configuration ldap service-data] user@host# set polling-interval polling-interval
Enable LDAPS as the secure protocol for connections to the server that stores service data.edit shared sae group se-region configuration ldap service-data] user@host# set ldaps

(Optional) Verify your configuration.

[edit shared sae group se-region configuration ldap service-data]
user@host# show 
server-address 10.10.45.3;
dn <base>;
authentication-dn <base>;
password ********;
directory-eventing;
polling-interval 30;
ldaps;

Configuring Access to Service Data

Related Topics