[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the NIC (SRC CLI)

Before you configure the NIC, complete the prerequisite tasks.

See Before You Configure the NIC .

To configure the NIC:

  1. Start the NIC component.

    See Starting the NIC (SRC CLI).

  2. Configure NIC operating properties.

    See Reviewing and Changing Operating Properties for NIC (SRC CLI).

  3. Configure NIC replication.

    See Reviewing and Changing Operating Properties for NIC (SRC CLI).

  4. (Optional) If you plan to use a configuration scenario other than OnePop (the default), delete any data for the OnePop scenario and configure the scenario name to specify the configuration scenario.

    See Changing NIC Configurations (SRC CLI).

  5. Configure a NIC scenario.

    See Configuring a NIC Scenario (SRC CLI).

  6. Verify the NIC configuration.

    See Verifying Configuration for the NIC (SRC CLI).

Related Topics

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.