Obtaining an SRC License

[Contents] [Prev] [Next] [Index] [Report an Error]

Before you install the SRC software, collect information about the system that will run the SAE as described in the following sections; then contact Juniper Networks Customer Services and Support and provide this system information to obtain a license.

Pilot License

To obtain a pilot license, you must provide the following information:

Username to be listed in the license key
Host ID of the SAE host (or the host IDs of all hosts if you have more than one)
Number of concurrent users that you want to be able to connect to the SAE

You can determine the host ID by issuing the following command on a C-series Controller:



 
user@host>  show system information

Look for the value for Hostid in the output; for example:

Hostid e30a2e07

Server License

To obtain a server license, you must provide the following information:

Username to be listed in the license key
Maximum number of concurrently active SAE services that you require
Time interval for which you need the server license
IP address or hostname of the license server. The SAE requires access to this IP address or hostname.