Management Ports

The management section of the system has three ports for management access (see Figure 7 and Figure 9):

• Two 10/100Base-T Ethernet ports—Each accepts an RJ-45 (male) connector, providing an out-of-band connection for LAN access through a Telnet session, SSH, or SNMP.
• One RS-232 management port—Accepts a DB-9 (female) connector. This port provides direct CLI access from a console terminal.

The management port is considered a data terminal equipment (DTE) interface. Direct connection to a terminal or PC (which also has DTE interfaces) requires a crossover cable.

See Setting the Initial Configuration for more information about management access.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.