Cabling the System for Power

After you have correctly cabled the system, you can then attach the power cord. See Figure 8 and Figure 10. See System Specifications for the power requirements for the system.

To cable the system for power:

1. Insert the power cord into the AC power IEC receptacle.
2. Insert the other end of the power cord into an appropriate AC power source.

   Note: We suggest that you use an uninterruptible power supply (UPS) with your C-series Controller.

   Note: To provide redundancy, do not terminate Power A and Power B leads at the same power source.

Figure 7: C2000, Front View

Figure 8: C2000, Rear View

Figure 9: C4000, Front View

Figure 10: C4000, Rear View

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.