Installing a Pilot License from the SRC CLI

You install pilot licenses on C-series Controllers from the SRC CLI. Before you install a pilot license, make sure that the Juniper Networks database is running on a C-series Controller.

When you enable the SAE on a C-series Controller, the software verifies that a license is installed.

To install a pilot license:

  1. On a C-series Controller on which the Juniper Networks database is configured to have a primary role, use the request sae import-pilot-license command:
      user@host> request sae import-pilot-license file-name file-name <server-address server-address > <name-space name-space > <authentication-dn authentication-dn > <password password >

    where:

    • file-name —Name of the file that contains the SRC license
    • server-address —IP address for the primary directory server. For C-series Controllers, this is the platform that has the Juniper Networks database configured to have a primary role.
    • namespace —Base DN for the directory. In most cases you can use the default <base>.
    • authentication-dn —DN used for directory authentication.
    • password —Password used for directory authentication.
  2. Verify that a valid license is available: 
    user@host> show sae licenses
SSC License Key Checker V3.0
    

    

    

    Type of license: Pilot. Status: OK.
    

    

    The following valid licenses are found:
    

    

    License: cn=83ced779,ou=Licenses,o=Management,o=UMC
license.val.component = 1
license.val.customer = mycompany
license.val.expiry = 2007-02-23
license.val.nodeid = 83ced779
license.val.release = 7.*
license.val.seqnum = 00555
license.val.type = pilot
license.val.userSessions = 100
    

    3.