Authenticating Registered Username/Password Pairs

You can specify whether the application programming interface (API) method registerLoginCredentials authenticates the registered username/password or creates the registration without authentication. You should enable this setting if your authentication server does not allow authentication while a session for the authenticated username is active.

Use the following configuration statement to specify whether or not registered username/password pairs are authenticated:

shared sae configuration login-registration {
registration-authentication;
}

To specify whether or not registered username/password pairs are authenticated:

  1. From configuration mode, access the subscriber sessions statement.
      user@host# edit shared sae configuration login-registration
  2. Enable or disable whether registered username/password pairs are authenticated.
      [edit shared sae configuration login-registration]
      user@host# set registration-authentication
  3. (Optional) Verify your configuration. 
    [edit shared sae configuration login-registration]
user@host# show
registration-authentication;