Adding Routers Individually

Use the following configuration statements to add a router:

shared network device name {
description description ;
management-address management-address ;
device-type (junose| junos| pcmm| third-party);
qos-profile [ qos-profile ...];
}

To add a router:

  1. From configuration mode, access the configuration statements that configure network devices. You must specify the name of a device with lowercase characters. This procedure uses junose_boston as the name of the router.
      user@host# edit shared network device junose_boston

    The same procedure can be used for JUNOS routers.

  2. (Optional) Add a description for the router.
      [edit shared network device junose_boston]
      user@host# set description description
  3. (Optional) Add the IP address of the router.
      [edit shared network device junose_boston]
      user@host# set management-address management-address
  4. (Optional) Specify the type of device that you are adding.
      [edit shared network device junose_boston]
      user@host# set device-type junose
  5. (Optional) Specify quality of service (QoS) profiles that are configured on the router.
      [edit shared network device junose_boston]
      user@host# set qos-profile [ qos-profile ...]
  6. (Optional) Verify your configuration. 
    [edit shared network device junose_boston]
user@host# show
description "Juniper Networks E320";
management-address 10.10.8.27;
device-type junose;
qos-profile dhcp-default;
interface-classifier {
  rule rule-0 {
    script #;
  }
}
    

    7.