[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuring the Subscriber Type
Use the following configuration statements
to configure the subscriber type:
- shared ims aracf-rq configuration subscriber-type-configuration name
- shared ims aracf-rq configuration subscriber-type-configuration name {
- nic-proxy nic-proxy;
- subscriber-id-type subscriber-id-type;
- }
To configure the subscriber type:
- From configuration mode, access the configuration statement
that configures the subscriber type. In this sample procedure, the
subscriber type called ip is configured.
- user@host# edit shared ims aracf-rq configuration
subscriber-type-configuration ip
- Specify the namespace that defines the properties for
the NIC proxy operations for the specified subscriber ID type. Each
subscriber type must use a different NIC proxy. All NIC proxies for
IMS are stored in the /nicProxies directory. In this sample procedure,
the namespace for the NIC proxy called ip is configured.
- [edit shared ims aracf-rq configuration subscriber-type-configuration
ip]
- user@host# set nic-proxy /nicProxies/ip
- (Optional) Specify the type of information used to identify
the subscriber. In this sample procedure, the subscriber ID type is
specified as the subscriber IP address.
- [edit shared ims aracf-rq configuration subscriber-type-configuration
ip]
- user@host# set subscriber-id-type address
- (Optional) Verify your configuration.
[edit shared ims aracf-rq configuration subscriber-type-configuration ip]
user@host# show
subscriber-id-type SIT_ADDRESS;
nic-proxy-namespace /nicProxies/ip;
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
