Adding JUNOS Routing Platforms and Virtual Routers

On JUNOS routing platforms, the SAE manages interfaces. The SRC software associates a virtual router called default with each JUNOS routing platform. Each JUNOS routing platform in the SRC network and its associated virtual router (VR) called default must appear in the directory. The VRs are not actually configured on the JUNOS routing platform; the VR in the directory provides a way for the SAE to manage the interfaces on the JUNOS routing platform.

You can add routers the following ways:

1. Adding Operative JUNOS Routing Platforms

Adding Operative JUNOS Routing Platforms

To add to the directory routers and JUNOS VRs that are currently operative and have an operating SNMP agent:

• In operational mode, enter the following command:

  request network discovery network network <community community >

  where:

• network —Address (with or without mask) of the network to discover

• community —Name of the SNMP community to which the devices belong

If you add a router using the discover network feature, the software adds the IP address of the first SNMP agent on the router to respond to the discover request.

Copyright © 2008, Juniper Networks, Inc. All Rights Reserved. Trademark Notice.