Configuring an SAE Group

Use the shared option of the set slot number sae shared command to add a new group. Use the shared sae group name command to configure the group.

To configure a group:

1. From configuration mode, add a group. For example, to add a group called REGION-1 in the path /SAE/:

   [edit]

   user@host# set slot 0 sae shared /SAE/REGION-1

2. Commit the configuration.

   [edit]

   user@host# commit

   commit complete.

3. Configure the group as you would a shared SAE configuration.

   [edit]
   user@host# edit shared sae group REGION-1 ? 
   Possible completions:
     <[Enter]>           Execute this command
   > configuration
   > dhcp-classifier Configure a DHCP classification script
   > group               Group of SAE configuration properties
   > user-classifier Configure a subscriber classification script
     |                    Pipe through a command

Copyright © 2008, Juniper Networks, Inc. All Rights Reserved. Trademark Notice.