[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuring Policer Actions (C-Web Interface)
The policer action specifies rate and burst
size limits and the action taken if a packet exceeds those limits.
You can create policer actions in JUNOS policer and JUNOS filter policy
rules.
Each policer action has a packet action. The packet
action specifies the action taken on a packet that exceeds its rate
limits. You configure packet actions within policer actions. There
are four types of actions that you can configure:
- Filter—Packets are discarded.
- Forwarding class—Packets are assigned to the forwarding
class that you specify.
- Loss priority—Packets are assigned the loss priority
that you specify.
- Parameter—The action specified by the parameter
is applied. Before you assign a parameter, you must create a parameter
of type packetOperation and commit the parameter configuration.
To configure a policer action:
- In the side pane, select a JUNOS policer or JUNOS filter
policy rule.
- From the Create new list, select Policer. Type a name for the action, and click OK.
- Enter information as described in the Help text in the
main pane, and click Apply.
- From the Create new list for the policer action, select Packet Action. Type a name for the action, and click OK.
- Expand the packet action, and click on the type of packet
action that you want to configure for this policer action.
- Click Create, enter information
as described in the Help text in the main pane, and click Apply.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
