Configuring Actions (C-Web Interface)

Actions define the action taken on packets that match conditions in a policy rule. You create actions within policy rules. The type of action that you can create depends on the type of policy rule. SeePolicy Management Overview .

Configure the action as described in the following sections:

• Configuring DOCSIS Actions (C-Web Interface)
• Configuring Filter Actions (C-Web Interface)
• Configuring FlowSpec Actions (C-Web Interface)
• Configuring Forward Actions (C-Web Interface)
• Configuring Forwarding Class Actions (C-Web Interface)
• Configuring Gate Spec Actions (C-Web Interface)
• Configuring Loss Priority Actions (C-Web Interface)
• Configuring Mark Actions (C-Web Interface)
• Configuring NAT Actions (C-Web Interface)
• Configuring Next-Hop Actions (C-Web Interface)
• Configuring Next-Interface Actions (C-Web Interface)
• Configuring Next-Rule Actions (C-Web Interface)
• Configuring Policer Actions (C-Web Interface)
• Configuring QoS Profile Attachment Actions (C-Web Interface)
• Configuring Rate-Limit Actions (C-Web Interface)
• Configuring Reject Actions (C-Web Interface)
• Configuring Routing Instance Actions (C-Web Interface)
• Configuring Scheduler Actions (C-Web Interface)
• Configuring Drop Profiles (C-Web Interface)
• Configuring Service Class Name Actions (C-Web Interface)
• Configuring Stateful Firewall Actions (C-Web Interface)
• Configuring Traffic-Class Actions (C-Web Interface)
• Configuring Traffic-Mirror Actions (C-Web Interface)
• Configuring Traffic-Shape Actions (C-Web Interface)

Copyright © 2008, Juniper Networks, Inc. All Rights Reserved. Trademark Notice.