Specifying Port Access for Traffic Classification
In the SRC software, the way that you specify a range of port numbers greater than or less than a specific value in a traffic classifier is different from the way you define a range in the configuration on JUNOSe routers.
In the SRC CLI, you specify ranges by setting values in the port-operation options in command statements.
To specify a range of port numbers greater or less than a specified value, you can:
- Define the full set of port numbers in the range to be allowed.
- Define the full set of port numbers in the range not allowed.
To configure port numbers greater than a defined value by specifying which values are allowed:
- For the port-operation option, enter eq.
- For the from-port option, enter the range of
ports allowed.
For example, to specify access to all port numbers greater than 10, specify 11..65535.
To configure port numbers greater than a defined value by specifying which values are not allowed:
- For the port-operation option, enter neq.
- For the from-port option, enter the range of
ports not allowed.
For example, to specify access to all port numbers greater than 10, specify 1..9.
To configure port numbers less than a defined value by specifying which values are allowed:
- For the port-operation option, enter eq.
- For the from-port option, enter the range of
ports.
For example, to specify access to all port numbers less than 10, specify 1..9.
To configure port numbers less than a defined value by specifying which values are not allowed:
- For the port-operation option, enter neq.
- For the from-port option, enter the range of
ports.
For example, to specify access to all port numbers less than 10, specify 11..65535.