Interface Classification Conditions

Use the fields in this section to define interface classification conditions.

broadcastAddr

  • Interface broadcast address.
  • Value—Valid broadcast address format
  • Example—broadcastAddr.hostAddress=“ 255.255.255.255”

ifAlias

  • Description of an interface.
  • Value—Interface description that is configured on the router. For JUNOSe routers, it is the description configured with the interface description command.
  • Example—ifAlias=“ 1st pppoe int”

ifDesc

  • Alternate name of the interface that is used by SNMP. This name is a system-generated name.
  • Value
    • On a JUNOSe router, the format of the description is
        ip<slot>/<port>.<subinterface>
    • On the JUNOS routing platform, ifDesc is the same as interfaceName.
  • Example—ifDesc=“ IP3/1.1”

interfaceName

  • Name of the interface.
  • Value
    • Name of the interface in your router CLI syntax
    • FORWARDING_INTERFACE for routing instance (used by traffic mirroring)
  • Example—For JUNOSe routers: interfaceName=“ fastethernet6/0.1”

For JUNOS routing platforms: interfaceName=“ fe-0/1/0.0”

For forwarding interface: interfaceName=“ FORWARDING_INTERFACE”

ipAddress

  • Interface IP address.
  • Value—Valid IPv4 IP address format
  • Example—ipAddress=“ 10.10.30.1”

ipMask

  • Interface network mask.
  • Value—Valid IPv4 IP network mask format
  • Example—ipMask=“ 255.255.255.255”

mtu

  • Maximum transfer unit configured on the interface.
  • Value—32-integer value
  • Example—mtu=“ 1492”

nasPortId

  • Port identifier of an interface.
  • Value—Includes interface name and additional layer 2 information
  • Example—nasPortId=“ fastEthernet 3/1” (There is a space between fastEthernet and slot number 3/1 in the nasPortId.)

pppLoginName

  • Login name for PPP subscribers.
  • Value—Login name in the format username@domain
  • Example—pppLoginName=“ pebbles@virneo.net”

radiusClass

  • RADIUS class attribute.
  • Value—RADIUS class name
  • Example—radiusClass=“ Premium”

serviceBundle

  • Content of the vendor-specific RADIUS attribute for the service bundle.
  • Value—Name of a service bundle

userIpAddress

  • Subscriber IP address (PPP only).
  • Value—valid IPv4 address
  • Example—userIpAddress=“ 192.168.30.15”

virtualRouterName

  • Name of the virtual router or routing instance.
  • Value—For JUNOSe routers: name of the virtual router in the format vrname@hostname

    For JUNOS routing platforms: name of the routing instance

  • Example—virtualRouterName=“ default@erx5”