[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Interim Accounting for Services and Subscribers

You can enable and disable interim accounting and set intervals between interim accounting messages for services and subscribers. These settings apply to all subscriber sessions and service sessions unless you override these settings for specific services by configuring an accounting interim interval in the value-added service configuration.

Use the following configuration statements to configure interim accounting.

shared sae configuration interim-accounting {
service-interim-accounting;
service-interim-interval service-interim-interval ;
subscriber-interim-accounting;
subscriber-interim-interval subscriber-interim-interval ;
}

To set up interim accounting:

  1. From configuration mode, access the configuration statement for interim accounting.
  2. (Optional) Enable service interim accounting.
  3. Specify the interval between service interim accounting messages.
  4. (Optional) Enable interim accounting for subscribers.
  5. Specify the interval between subscriber interim accounting messages.
  6. Verify your configuration. 
    [edit shared sae configuration interim-accounting]
user@host# show 
service-interim-accounting;
service-interim-interval 900;
subscriber-interim-accounting;
subscriber-interim-interval 900;
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All Rights Reserved. Trademark Notice.