[Contents] [Prev] [Next] [Index] [Report an Error]

Creating Virtual Routers for the CMTS Device with the SRC CLI

You need to add a virtual router object called default to the CMTS device.

Use the following configuration statements to add a virtual router:

shared network device name virtual-router name {
sae-connection [ sae-connection ...];
snmp-read-community snmp-read-community ;
snmp-write-community snmp-write-community ;
scope [ scope ...];
local-address-pools local-address-pools ;
static-address-pools static-address-pools ;
tracking-plug-in [ tracking-plug-in ...];
}

To add a virtual router:

  1. From configuration mode, access the configuration statements for virtual routers. You must specify the name of a device with lowercase characters. In this sample procedure, pcmm_dtr is the name of the router and default is the name of the virtual router.
  2. Specify the addresses of SAEs that can manage this router. This step is required for the SAE to work with the router.
  3. (Optional) Specify an SNMP community name for SNMP read-only operations for this VR.
  4. (Optional) Specify an SNMP community name for SNMP write operations for this virtual router.
  5. (Optional) Specify service scopes assigned to this virtual router.

    See Configuring Service Scopes.

  6. (Optional) Specify the list of IP address pools that a CMTS virtual router currently manages and stores.

    If you are using assigned IP subscribers along with the network information collector (NIC), you need to configure either a local or static address pool so that the NIC can resolve the IP-to-SAE mapping.

  7. (Optional) Specify the list of IP address pools that a CMTS VR manages but does not store.

    If you are using assigned IP subscribers along with the NIC, you need to configure either a local or static address pool so that the NIC can resolve the IP-to-SAE mapping.

  8. (Optional) Specify the plug-ins that track interfaces that the SAE manages on this virtual router.
  9. (Optional) Verify your configuration. 
    [edit shared network device pcmm_dtr virtual-router default] 
user@host# show 
sae-connection [ 10.14.39.2 10.10.5.30 ];
snmp-read-community ********;
snmp-write-community ********;
scope POP-Westford;
local-address-pools "10.25.8.0 10.25.20.255";
tracking-plug-in rksPlugin;
    

    

    10. 




[Contents]
[Prev]
[Next]

[Index]

[Report an Error]










Copyright © 2008, Juniper Networks, Inc.
All Rights Reserved.
	Trademark Notice.