[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Global Parameters (SRC CLI)

If you change global variables for policies, the change takes effect the next time a service is activated; the change does not take effect for active service sessions.

Use the following configuration statement to create a global parameter:

policies global-parameters name {
description description ;
default-value default-value ;
type type ;
}

To create a global parameter:

  1. From configuration mode, enter the global parameter configuration. For example, to create a parameter called bandwidth:
  2. (Optional) Enter a description for the parameter. You can provide extra information and examples of how the parameter is used.
  3. (Optional) Configure a default value that the policy engine uses if no other values are provided during the parameter value acquisition process.

    See Parameter Types for valid values of each parameter type.

  4. (Optional) Type of attribute for which you can use the parameter.
  5. (Optional) Verify your configuration. 
    [edit policies global-parameters bandwidth]
user@host# show 
default-value 5000000;
type rate;
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All Rights Reserved. Trademark Notice.