[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Service Class Name Actions

You can configure service class name actions for PCMM policy rules. The type of action that you can create depends on the type of policy rule. See Policy Information Model.

Use the following configuration statements to configure service class name actions:

policies group name list name rule name service-class-name name {
service-class-name service-class-name ;
description description ;
}

To configure a service class name action:

  1. From configuration mode, enter the service class name action configuration. For example, in this procedure, scna is the name of the service class name action.
  2. (Optional) Configure the name of a service class on the CMTS device that specifies QoS parameters for a service flow.
  3. (Optional) Enter a description for the service class name action.
  4. (Optional) Verify the service class name action configuration. 
    [edit policies group pcmm list serviceClass rule pr service-class-name scna]
user@host# show configuration policies group pcmm list serviceClass rule pr 
service-class-name scna 
service-class-name scn_up;
description "Service class name action for pcmm service class policy.";
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All Rights Reserved. Trademark Notice.