[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuring TLS on the SAE
Use the following configuration statements
to configure TLS on the SAE:
- shared sae configuration driver junos security {
- need-client-authentication;
- certificate-identifier private-key;
- }
To configure TLS on the SAE:
- From configuration mode, access the configuration statement
that configures security for the JUNOS TLS connection. In this sample
procedure, the JUNOS driver is configured in the west-region group.
- user@host# edit shared sae group west-region
configuration driver junos security
- (Optional) Specify whether or not the SAE requests a client
certificate from the router when a connection to the router is established.
- [edit shared sae group west-region configuration driver
junos security]
-
user@host# set need-client-authentication
- Specify the name of certificate to be used for TLS communications.
- [edit shared sae group west-region configuration driver
junos security]
-
user@host# set certificate-identifier private-key
- (Optional) Verify your TLS configuration.
[edit shared sae group west-region configuration driver junos security]
user@host# show
need-client-authentication;
certificate-identifier privatekey;
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
