[Contents] [Prev] [Next] [Index] [Report an Error]

Adding JUNOSe Routers and Virtual Routers with the CLI

The SAE uses router and virtual router objects to manage interfaces on JUNOSe virtual routers. Each JUNOSe router in the SRC network and its virtual routers (VRs) must have a configuration.

There are two ways to add routers:

Adding Operative JUNOSe Routers and Virtual Routers

To add routers and JUNOSe VRs that are currently operative and have an operating SNMP agent:

In operational mode, enter the following command:
where:

network —Address (with or without mask) of the network to discover

community —Name of the SNMP community to which the devices belong

If you add a router using the discover network feature, the software adds the IP address of the first SNMP agent on the router to respond to the discover request.

After you add routers and JUNOSe VRs through network discovery, configure the virtual router’s managing SAE address.

Adding Routers Individually

Use the following configuration statements to add a router:



shared network device  name  {
description  description ;
management-address  management-address ; 
device-type (junose| junos| pcmm| third-party); 
qos-profile [ qos-profile ...];
}

To add a router:

From configuration mode, access the configuration statements that configure network devices. You must specify the name of a device with lowercase characters. This procedure uses junose_boston as the name of the router.
The same procedure can be used for JUNOS routers.
(Optional) Add a description for the router.
(Optional) Add the IP address of the router.
(Optional) Specify the type of device that you are adding.
(Optional) Specify quality of service (QoS) profiles that are configured on the router.

(Optional) Verify your configuration.

[edit shared network device junose_boston] 
user@host# show 
description "Juniper Networks E320";
management-address 10.10.8.27;
device-type junose;
qos-profile dhcp-default;
interface-classifier {
  rule rule-0 {
    script #;
  }
}

Adding Virtual Routers Individually

Use the following configuration statements to add a virtual router:



shared network device name virtual-router name {
sae-connection [ sae-connection ...]; 
snmp-read-community  snmp-read-community ; 
snmp-write-community  snmp-write-community ; 
scope [ scope ...]; 
local-address-pools  local-address-pools ; 
static-address-pools  static-address-pools ; 
tracking-plug-in [ tracking-plug-in ...];
}

To add a virtual router:

From configuration mode, access the configuration statements for virtual routers. You must specify the name of a device with lowercase characters. This procedure uses junose_Boston as the name of the router and vr1 as the name of the virtual router.
Specify the addresses of SAEs that can manage this router. This step is required for the SAE to work with the router.
To specify the active SAE and the redundant SAE, enter an exclamation point (!) after the hostname or IP address of the connected SAE. For example:
(Optional) Specify an SNMP community name for SNMP read-only operations for this VR.
(Optional) Specify an SNMP community name for SNMP write operations for this virtual router.
(Optional) Specify service scopes assigned to this virtual router. The scopes are available for subscribers connected to this virtual router for selecting customized versions of services.
(Optional) Specify the list of IP address pools that a JUNOSe virtual router currently manages and stores.
(Optional) Specify the list of IP address pools that a JUNOSe VR manages but does not store.
(Optional) Specify the plug-ins that track interfaces that the SAE manages on this virtual router.

(Optional) Verify your configuration.

[edit shared network device junose_boston virtual-router vr1] 
user@host# show 
sae-connection 192.168.10.25;
  snmp-read-community ********;
  snmp-write-community ********;
  scope POP-Boston;
local-address-pools "(10.25.8.0 10.25.20.255])";
static-address-pools "({10.30.30.0/24,10.30.30.0,10.30.30.255})";
tracking-plug-in flexRadius;

[Contents] [Prev] [Next] [Index] [Report an Error]