[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Simulated Router Drivers (SRC CLI)

You configure a simulated router in the same way that you configure a real router.

Before you configure a simulated router driver:

Make sure that you configure an interface classification script for the simulated router.
See Overview of Classification Scripts .
Configure the SAE to instantiate a simulated router driver for each simulated router that you create.
(Optional) Configure a session store for a simulated router driver. The driver uses the session store to store subscriber sessions, service sessions, and policies.
See Configuring the Session Store Feature

Use the following configuration statements to configure simulated router drivers:



shared sae configuration driver simulated  name  {
driver-type (junos | junose | pcmm); 
router-version  router-version ; 
driver-address  driver-address ; 
transport-router  transport-router ; 
}

To configure simulated router drivers:

From configuration mode, access the configuration statement that configures simulated router drivers. In this sample procedure, west-region is the name of the SAE group, and default@simjunos is the name of the simulated router driver.
Configure the type of device that the simulated driver simulates.
(Optional) Configure the version of the router software to simulate. This is the software version that is sent by the router.
Configure the IP address of the device driver.
(Optional) Configure the name of a virtual router that is used to connect to the SAE. This value is passed to the router initialization script. It is not supported on the JUNOS routing platform.

(Optional) Verify the configuration of the simulated driver.

[edit shared sae group west-region configuration driver simulated default@simJunos]

user@host# show

driver-type junos;
router-version 8.4;
driver-address 10.10.90.5;

Configuring Simulated Router Drivers (SRC CLI)

Related Topics