Configuring the RADIUS Local IP Address and NAS ID (SRC CLI)

Use the following configuration statements to set the local RADIUS address and network access server (NAS ID):



slot  number  sae radius
{
local-address  local-address ; 
local-nas-id  local-nas-id ; 
}

To set the local RADIUS address and NAS ID:

From configuration mode, access the SAE RADIUS configuration. This configuration is under the slot 0 hierarchy.
Configure the local IP address that the SAE uses to communicate with RADIUS servers.
Configure the NAS ID that identifies the SAE when it sends RADIUS authentication and accounting records. Typically, the NAS ID is the name of the SAE host.

(Optional) Verify your configuration.

[edit slot 0 sae radius] 
user@host# show 
local-address 10.10.4.20;
local-nas-id SAE.host1;